c
Home LinHai Installation Custom Installation

Trike City USA
7320 South US Hwy 1
Pt St Lucie, Fl
772-344-0502

 

To start building your dream scooter trike is simply, Pick your options and call us. The scooter trike kit is $1199 and shipping to most of the CONUS is $99

We will need to know what you will need as far as what the drive sprocket requirements are. You can order the sprocket assembly you want from the list below when you order the kit . Or if your not sure which drive sprocket assembly you want at this time; you can order the drive sprocket assembly when your ready for it and just pay for separate mailing, normally $6.00. Allow 72 hours for machine shop work. This opinion is strongly recommended. Below are your options for the sprocket and spline plate assembly.

  1. Custom one off drive sprocket assembly, you tell us the size of the center holes and bolt hole spacing and the maximum height the bolt heads can protrude. You can even order a custom sprocket tooth count. Call for pricing.

  2. Our standard drive sprocket assembly is a 34 tooth aluminum sprocket with an inch & 1.5" center hole. The 3.5" spline plate has a .960 center hole.The bolt holes are approximately 1 & 3/8 inch spacing. Which is 1 & 1/4" (out from the center/radius); 2 &1/2" diagonally spaced. These option will require you to machine the center hole on the spline plate to your required size. No additional cost. Some VOG's require option 5.

  3. Our standard drive sprocket assembly (option 2) plus the 19 tooth spline for the VOG $25.00.

  4. Large 4 &5/8" plate with your choose of diagonally spaced bolt holes (instead of option 2); a 34 tooth aluminum sprocket with a custom center hole. $35.00
    Spacing available is 2 3/8, 2 3/4, 3 3/8, and 3 13/16

  5. 37 tooth sprocket in place of the 34" - recommended for 300cc to 400cc $15.00

  6. Sprocket center hole machined to your size $25.00

  7. Counter sunk bolt heads and sprocket machined for bolts $40.00

  8. Spline plate machined to your size spline $35.00

  9. Your spline machined for spline plate $35.00

  10. 31 tooth sprocket, recommended for 150cc scooters, or scooters to be used in hilly areas, no charge.